Shower Leak Repairs in Newcastle by actual plumbers REQUEST A QUOTE
Shower Leak Repairs in Newcastle by actual plumbers REQUEST A QUOTE
Request a Quote
Shower seals fail gradually, so the early warning signs are easy to miss. These are the ones that tell us it’s time to reseal.
The bead around the screen, hob or floor has split or pulled away, the most common way water gets behind the wall.
Black or pink mould that keeps coming back after cleaning is a sign the seal is failing and holding moisture.
A smell that lingers after the shower’s off often means water is sitting in the wall or subfloor.
Damp flooring or water creeping out next to the shower points to a failed joint.
Tiles that lift or sound hollow when tapped (we call these drummy tiles) suggest water has got in behind them.
Watermarks on the ceiling under an upstairs bathroom are a clear sign that the shower is leaking through the floor.
Shower seals don't last forever
Silicone and grout (the rigid filler between the tiles) both break down with age, and a few things speed it up. Constant wetting and drying make silicone shrink, harden and peel away from the tile. Movement in the building or a loose shower screen opens up the joints. Harsh cleaners and mould eat into the sealant. And if the original bead was laid over a dirty or damp surface, it never bonded properly to begin with.
Once a seal fails, water gets behind the tiles and into the wall or floor. Resealing means stripping the old sealant and sealing the shower tiles and joints again with fresh silicone, before the water causes real damage. Where the grout has gone, shower regrouting and grout repair restore the rigid joints, and if the waterproof membrane underneath has failed, that’s a waterproofing repair rather than a reseal. When the water’s tracking somewhere you can’t see, our leak detection finds the source first.
See the results for yourself
WHY LEAK HUNTERS
With our team you get specialists who’ve resealed hundreds of Newcastle showers.
We reseal in place, so there’s no ripping out tiles and no bathroom out of action for days.
To pinpoint a hidden leak.
For balcony, podium and strata leaks.
For regrouting and tile repairs.
Got Questions? We've Got Answers.
Most resealing jobs are done in a single visit of a few hours. The new silicone needs time to cure, so we’ll tell you how long to leave the shower before using it when we finish.
No. We reseal in place, stripping the old silicone and renewing the joints without removing tiles. We’d only lift a tile if one has already failed and needs a repair, or if the waterproofing underneath has failed.
With the joints stripped, cleaned and dried properly and a mould-resistant silicone applied, a reseal lasts for years.
If the leak is coming from failed silicone or grout at the joints, then yes, resealing stops it at the source. If water is escaping from behind the wall or through a failed waterproof membrane, that needs leak detection first, and if the membrane itself has failed we’ll tell you before any work starts that the repair falls outside what we do.
